Drum Pump,Standard Pump SP-700-SR

Drum Pump - Standard Pump SP-700-SR
  Standard Pump
  Husky Drum Pumps
  Links
Drum Pump - Standard Pump SP-700-SR
Drum and Container Pumps


Discharge Fitting

The SP-700-SR drum pump is engineered specifically for transferring viscous materials from drums and tanks commonly found in the industrial marketplace. The progressive cavity design deliverers a continuous, smooth flow of material with little product degradation. Maximum viscosity is 25,000 cps (mPAS).

Common Applications:  
> Polymers > Oil & Greases
> Resins > Paints
> Adhesives > Varnishes

Technical Data :
Design: Seal-less / Centrifugal
Max. Viscosity: 25,000 cps (mPAS)
Dishcharge Port: 1.5" / 38mm hose barb
Mechanical Seal: Silicone Carbide
Stator Materials: Teflon, Viton or Buna-N
Immersion Lengths: 27" (700mm)
39" (1000mm)
47" 1200mm)
Wetted Materials: Tube & Rotor Assembly: 316 Stainless Steel Stator Material: Teflon, Viton, or Buna
Motor Drives: SP-ODP, SP-280P, SP-ENC, SP-400-2, SP-A2.
 Consult chart for viscosity ratings and performance curves(PDF)
Fittings: Large Type Acme Thread design enables
operator to disassemble pump quickly for cleaning, maintenance, and inspection.
Maximum
Flow Rate:
17GPM / 64 LPM
Pressure:
174 psi / 12 bar
Benefits:
  • Easy Maintenance
  • Threaded Components
  • Interchangeable Motors Drives
  • Continuous Flow
  • Low Shearing Properties
Motor Drives :
• SP-ODP SERIES
• SP-ENC SERIES
• SP-280 SERIES
• SP-400 SERIES
• SP-A2 SERIES

Motor Drives
Motor Drives
Consult chart for viscosity ratings and performance curves(PDF)

Drum & Container Pumps (Brochure)
Drum & Container Pumps (Operating Manual)
High Viscosity Drum & Container Pumps
Flow Control Systems
Drum Pump Motors & Tube (English)
Drum Pump Motors & Tube (French)

Warning: When pumping flammable or combustible liquids pump tube must be
                used in conjunction with an explosion proof motor.

SP-ODP SP-ENC SP-280 SP-400 SP-A2

Site Designed By Panther Marketing & Design